Mans grozs:

0 prece(s) - €0,00
Jums ir tukšs Jūsu iepirkumu grozā.


Laipni lūgti mūsu autoveikalā!
Ekskluzīvi un videi draudzīgi auto mazgāšanas un kopšanas līdzekļi,
lai aizsargātu Jūsu auto vērtību!

Vairāk skatu

Menzerna Heavy Cut Compound 400 Green Line 250 ml

Pieejamība: Noliktavā


Īss apraksts

VOC-free innovative cutting compound for automotive clear coats without unpleasant solvent odors. Removes sanding marks and signs of use without aggressive solvents.



Menzerna Heavy Cut Compound 400 (HCC 400) GREEN LINE is a VOC-free* innovative cutting compound for automotive clear coats. HCC 400 GREEN LINE removes sanding marks and signs of use in the shortest possible time without aggressive solvents. High performance finish without unpleasant solvent odors.

The innovative cut compound for automotive clear coats leaves a dazzling impression everywhere. Gets sanding marks out of the way in record time- without aggressive, volatile solvents. Works into the finish range without any unpleasant odors thanks to the latest polishing technologies with diminishing abrasives.


  • Extremly high abrasion;
  • Extremly fast removal of sanding marks;
  • High yield;
  • High-gloss Finish;
  • No dust formation;
  • VOC-free in according with DIN EN ISO 11890-2;
  • Free from unpleasant solvents;
  • Easy to handle;
  • Silicone free;
  • Cut: 8/10
  • Gloss: 8/10

Lietošanas pamācības


  • Rotary: 800-1200 rpm.
  • Orbital: depends on manufacturer.
  • P1500 with lambs wool.
  • P2000 with Pad (Heavy Cut Foam Pad, Medium Cut Foam Pad, Soft Cut Foam Pad).
  1. Clean surface thoroughly prior to polishing.
  2. Shake the bottle prior to use and apply a small quantity of the product onto the polishing pad (a pea-sized drop is sufficient for an area measuring approx. 40 x 40 cm).
  3. Use the Menzerna Heavy Cut Foam Pad or Menzerna Lambs wool in the event of heavy signs of use. If using a new or dry pad, apply sufficient polish to prevent the formation of noticeable holograms.
  4. Use either a rotary or an orbital polishing machine and use the cross-coating method. Apply light pressure at the start of the polishing process. Take away the pressure in the final cycles and increase the speed of the polishing machine by 10%.
  5. If working on very dry coatings, spray a little water onto the surface to prevent dust formation.
  6. At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is visible.
  7. Once you have finished polishing, remove any residue with our Premium Microfiber cloth, without applying any pressure.
  8. Whatever the demands of the surface: Use Menzerna HCC400 with the Soft Cut Foam Pad or a Menzerna Finish in order to achieve a high-gloss finish.


Papildu Informācija

Ražotājs Menzerna
Preces kods 22200.281.001
EAN 4260063012143
Svars 0.2500
Izmēri / Tilpums 250 ml / pudele
Ražotājvalsts Vācija

Produkta Birkas

Izmantojiet atstarpes, lai atdalītu birkas, apostrofus - citātiem.